3 Tips to unclog your Aerus Electrolux vacuum hose and repair your vacuum cleaner at home. Pictures to help you through the process.
If you are experiencing a hose blockage, it may be quite easy for you to fix this problem, here are 3 tips to unclog your hose.
Tip 1: If you have a Electrolux vacuum cleaner on the back of it where the filter is located is the exhaust of the motor. Often times if it is just dust that is blocking the hose this will work perfectly. Simply take the hose and put it where the filter usually goes. Now take the handle of the hose and face it inside the vacuum where the hose usually attaches (you don't dust flying in the air) turn the vacuum on and see if the hose becomes unblocked.
Tip 2: If tip 1 does not work, than you will likely need to take off the hose handle, grab a screwdriver and remove the handle. Once the handle is off repeat Tip # 1. The hose should be unblocked.
Tip 3: If the first 2 methods did not work and you have removed the handle from the hose, grab a broomstick and slide it through the hose. If the blockage is near the end grab some pliers and pull it out. If the blockage is in the middle push the broomstick with a little force, if there is no movement STOP.
At this point you may need our help. Call us and we would be happy to assist. Also if you are not the kind of person who likes to do stuff like this on your own just call us and we will fix your problem in 24 hours or less. We offer our services to the entire Montreal area and it surroundings.